The Coleman Saluspa E02 error is a common problem that can occur with inflatable hot tubs. The error code indicates that there is a problem with the water flow, which can prevent the hot tub from heating up or circulating the water properly. If you are facing this problem, you can try the steps mentioned below to fix the error on your hot tub.

There are a few things that can cause the Coleman Saluspa E02 error, including:

• A dirty filter
• A clogged heater
• A faulty pump
• A low water level

If you are getting the Coleman Saluspa E02 error, the first thing you should do is check the water filter. The filter should be cleaned regularly to remove dirt, debris, and algae. If the filter is dirty, it can restrict the flow of water and cause the E02 error.

If the filter is clean, you should check the heater. The heater can become clogged with debris, which can prevent it from heating the water properly. If the heater is clogged, you will need to clean it or replace it.

If the filter and heater are clean, you should check the pump. The pump can become faulty and cause the E02 error. If the pump is faulty, you will need to replace it.

Finally, you should check the water level. The water level should be between the “min” and “max” marks on the hot tub. If the water level is low, you will need to add more water.

If you have checked all of these things and you are still getting the Coleman Saluspa E02 error, you may need to contact Coleman customer service for help.

How to Fix the Coleman Saluspa E02 Error

Here are the steps on how to fix the Coleman Saluspa E02 error:

1. Check the water filter.
2. Check the heater.
3. Check the pump.
4. Check the water level.
5. Contact Coleman customer service.

Step 1: Check the water filter

The first step is to check the water filter. The filter should be cleaned regularly to remove dirt, debris, and algae. If the filter is dirty, it can restrict the flow of water and cause the E02 error.

To check the filter, you will need to remove it from the hot tub. The filter is usually located near the bottom of the hot tub. Once you have removed the filter, you can inspect it for dirt and debris. If the filter is dirty, you can clean it by rinsing it with water or by using a filter cleaning solution.

Step 2: Check the heater

The next step is to check the heater. The heater can become clogged with debris, which can prevent it from heating the water properly. If the heater is clogged, you will need to clean it or replace it.

To check the heater, you will need to remove the access panel on the side of the hot tub. Once you have removed the access panel, you can inspect the heater for debris. If you see any debris, you can remove it with a brush or a vacuum cleaner.

Step 3: Check the pump

The next step is to check the pump. The pump can become faulty and cause the E02 error. If the pump is faulty, you will need to replace it.

To check the pump, you will need to remove the access panel on the side of the hot tub. Once you have removed the access panel, you can inspect the pump for any signs of damage. If you see any damage, you will need to replace the pump.

Step 4: Check the water level

The final step is to check the water level. The water level should be between the “min” and “max” marks on the hot tub. If the water level is low, you will need to add more water.

To check the water level, you will need to look at the water level indicator on the side of the hot tub. If the water level is below the “min” mark, you will need to add more water.

Step 5: Contact Coleman customer service

If you have checked all of the above and you are still getting the Coleman Saluspa E02 error, you may need to contact Coleman customer service for help. Coleman customer service can help you troubleshoot the problem and determine the best course of action.

Conclusion

The Coleman Saluspa E02 error can be a frustrating problem, but it is usually easy to fix. By following the steps above, you should be able to fix the error and get your hot tub back up and running.